The difference between copper plating and galvanizing.
2025-01-01
Steel products can be seen everywhere in our lives, and are widely used in all walks of life. However, metal corrosion is still a headache for people, which not only consumes precious resources, but also seriously pollutes the environment. So how can we reduce this from happening?

Let us take a closer look in this article.

 

First of all, since there is corroded metal, there will be corrosion-resistant metal, so the corrosion-resistant metal can be effectively reduced by coating the corrosion-resistant metal surface. Therefore, copper plating and galvanizing have become the hottest metal corrosion protection process at present. So what is the difference between galvanized and copper plated?

图片1.png 图片2.png

Among them, the corrosion resistance of copper is more than ten times that of steel and more than three times that of galvanized steel. The surface of copper will produce oxides with strong adhesion, which have a good protective effect on the internal copper, thereby further resisting Corrosion formation is interrupted. However, copper materials will be more expensive. If you pursue the general anti-corrosion effect, you can add a galvanized layer. If you need better electrical conductivity in addition to anti-corrosion, you can choose copper-plated materials.

 

Copper-plated steel has the advantages of excellent electrical conductivity, good thermal stability, strong corrosion resistance, convenient construction, long life, less inspection and maintenance after commissioning, and no pollution.

The zinc coating on galvanized metal prevents corrosive substances from reaching the weaker underlying substrate metal. And the resulting zinc coating is tough and durable, often providing decades of protection to the underlying metal.

图片3.png 图片4.png

Galvanized steel is commonly used to make structures such as building frames, street furniture, fire escapes, ladders and balconies. And also common in the automotive industry, it can be made into rust-proof parts, and bumpers, beams, frames and chassis can also be made of galvanized steel.

Because copper has good electrical conductivity, it is mainly used for equipment grounding down-conductors, grounding grid horizontal grounding conductors, cable trenches and tower horizontal grounding conductors, and the wiring is neat and convenient.

 

The above is the difference between galvanized and copper-plated and their respective advantages and uses. If you want to know more, you can always pay attention to Baowu.